Better technology. Better outcomes.™

Advanced Silver Antimicrobial Burn, Wound and Surgical Care Products

Surgical Wound Pad Dressings
	Clinical Protocols
Advanced Antimicrobial Wound Protection

Silverlon® Surgical Dressings are the safest and most powerful antimicrobial surgical barrier wound dressings available, and should be placed in primary contact with the surgical incision. Silverlon® Surgical Dressings are different (Cura Surgical).

All Silverlon® Surgical Dressings are composed of a wound contact layer of Silverlon® and an absorbency pad. Silverlon® Wound Pad Dressings have a patent pending backing layer of perforated polyurethane film that allows moisture to be released from or added to the absorbency pad for non adherence and easy inspection. Silverlon® Island Surgical Dressings have a 2 inch of tape border. In both cases, the Silverlon® wound contact layer provides an antimicrobial barrier to all known environmental and wound pathogens.

• For external application only, remove prior to MRI scanning.
• Silverlon® dressings are contraindicated for patients with known sensitivity to silver or nylon.
• Silverlon® Surgical Dressings have been reported to reduce the pain, swelling and inflammation from acute wounds.

Print Silverlon® Surgical Wound Pad Dressing OR Guidelines for Use in a PDF Format

• The wound may be examined daily by gently lifting the dressing and the tape, after examining the wound, reposition the Silverlon® dressing onto incision and cover and secure with a new secondary gauze dressing and tape.

• Moisture may be added to the dressing if it appears dry, or to reduce adherence. Use sterile, distilled, or tap water as the re wetting agent.
• Replace dressing if it is saturated with blood.

• If systemic body temperature elevation is greater that 102⁰ F for 2 consecutive 4 hour intervals.
• If there is purulent drainage from the wound site.
• If there is odor from the wound site.
• Per Professional Discretion

• Remove and dispose of the used surgical dressing.
• Take a new Silverlon® Island Surgical Dressing from its pouch and fold back the release Liner, exposing the Silverlon® pad but not the adhesive tape borders.
• Activate the Silverlon® Island Surgical Dressing by wetting the Silverlon® pad with 1 ounce of sterile, distilled, or tap water.

  Wetting tip: Using a bulb or piston syringe, or bottle of sterile water, evenly pour the water across the entire surface of the Silverlon® pad ensuring even moisture level throughout the pad.

• Remove the release liner and center the Silverlon® Island Dressing over the incision. Gently press down on the tape borders to ensure good skin contact.

Important Note: The discharge dressing may be left in place and worn continually for 7 days, with no additional dressing maintenance required. Patient may shower with the dressing in place, and can re-tape the dressing if the edges start to peel up.

Print Silverlon® Surgical Wound Pad Dressing Maintenance & Discharge Dressing Instructions in a PDF Format

Argentum Medical, LLC receives the 2006 Frost & Sullivan Product Innovation Award for the Silverlon® Negative Pressure Dressing:

Please contact us at: 1-888-551-0188 for more information about this product.

Silverlon® Negative Pressure Wound Dressings are applied for improved outcomes with the Versatile 1™ or other Negative Pressure Wound Therapy Systems when treating chronic and acute wounds, burns, and surgical procedures. The Silverlon® NPD Advantage: 7 day use over skin grafts while under negative pressure therapy systems (1 dressing kit for 1 week of therapy) Fewer dressing changes over the course of therapy Produces an accelerated wound healing potential No infections reported Provides medical and economical advantages Minimal reduction in fluid flow capacity as compared to VAC foam alone

The Silverlon® Calcium Alginate Dressing Advantage: Silverlon® CA has more Silver ions 87% more silver ions (antimicrobial agent) at 72 hours than Aquacel Ag™ 190% more silver ions than Silvercel™ Silverlon® CA has greater tensile strength When saturated. Silverlon® CA is over 2000% stronger than Aquacel Ag™ When saturated, Silverlon® CA is over 130% stronger than Silvercel™
Silverlon® CA has same absorbency as either Aquacel Ag™ or Silvercel™ Silverlon® CA has 100 gsm (gram per square meter) of calcium alginate Silverlon® CA costs less Please CLICK HERE for more information about the Silverlon® CA Dressing.

For a printer friendly version of this Silverlon® Surgical Wound Pad Dressing Protocols Page, please click here

Contact Information

(Toll Free) Phone: 1-888-551-0188		E-Mail Us at: info@silverlon.com		FAX #: 501-679-3378
Argentum Medical, LLC. 240 81st Street Willowbrook, Illinois 60527

---

All of the Silverlon® Wound Care, Burn Care, and Surgical Products listed on this website are FDA Cleared. Copyright © 1998-2008 Argentum Medical, LLC. All Rights Reserved.

Silverlon® is Manufactured in the USA